Document LTP0101 rev 2a

 

Page Location: Home > Installation > Service Level Programming > Programming for a Relay Switch

Programming for a Relay Switch

Configure heat pump for a relay or flow switch. This can provide automatic pool/ spa thermostat switching.

Press "Up" and "Down" buttons simultaneously until CF1 appears.

Press "Pool / Spa" button until LOC is displayed.

Press "Up" or "Down" to passcode. Default is "17".

Press "Pool / Spa" button once.

 

Press the "Pool / Spa" button until FS2 is displayed.

Press the "Up" or "Down"

  • "0" - not active
  • "1" - enable

 

Once the FS2 feature has been activated the "POOL / SPA" button will no longer function. The relay or flow switch is used to change between the pool and spa temperature settings.